XPSound XP201 Internal PC Hardware Installation Guide

See also: | Internal Installation Walk-through | External Installation Walk-through |

"Internal" Step by step: | Step #1 | Step #2 | Step #3 | Step #4 | Step #5 | Step #6 | Step #7 | Step#8 | Step#9 | Step #10 |


Please note: These instructions are for the internal hardware installation of the XP201 to your PC. Please remember that the unit can also be used fully as a stand alone unit without mounting internally. This guide is just for those of us who like to have a neat all inclusive solution.

Step 1

Turn off and remove all cables (including power) from your PC.

Remove one of the exterior case panels by unscrewing the chassis screws of your PC. There are many PC case varieties on the market. Most cases are quite easy to open, however if you have difficulty, please consult your dealer or PC manufacturer for information.

You will now have access to all of the internal workings of your computer. This will reveal the inside of your PC.

Note: Please check with your PC manufacturer or dealer before opening your case. Some dealers may void your warranty if you attempt to open your PC chassis.


Next Step -->